2ml HDPE Extrusion Blow Molding Machine MP55D for Medical Bottle
MP55D is specifically designed for making bottles from 5ml up to
maximum 1L. It is hydraulic driven with accrate eletrical control
system. MP55D has double stations to increase the production
efficiency. Also, it has variety of choice of die heads. With more
than 10 years of success in the market, MP55D is updated to be one
of the most reliable and popular model in the world.
EXTRUSION DIE HEAD: HIGHLY EXPERIENCED MULTI-CAVITY AND MULTI-LAYER
Adopting with latest die head design, MEPER focuses on providing
high quality and high precision self-manufactured extrusion die
heads for customers.
1Heating barrel from room temperature to required temperature will
take about 30 minutes. If there is residual cold material in
barrel, keep temperature for 10 minutes and then run screw and load
material so that residual cold material can be totally molten and
do no harm to screw. Before temperature of each stage/zone of
barrel reaches set temperature of product moulding process, do not
run extrusion machine, otherwise machine will be damaged.
2 Safety valve of oil loop has been set before delivery and no
change is allowed in normal condition.
3 After running machine, open cooler inlet valve little by little
when temperature of cooling water is increased by 5-10℃. Adjust the
inlet water volume (usually 75 liter/minute or above) and keep oil
temperature under 55℃.
|Double station blow molder with horizontal linear mould shuttle|
|Linear mould stroke||A||380|
|Centre Distance||2x2 fold||130|
|Screw L/D Ratio||L/D||24||24||24|
|Extruder Inverter Power||kW||11||15||18.5|
|Extruder Moter Power||kW||11||15||18.5|
|Srew Heating Power||kW||5.85||9.4||12.3|
|Oil pump Motor Power||kW||7.5||7.5||7.5|
|Total Power of Machine||kW||33.34||40.92||47.29|
|Air Requirement approx||m3/min||0.8-1||0.8-1||0.8-1|
|Air Working Pressure||Mpa||0.6-0.8||0.6-0.8||0.6-0.8|
|Consumption Cooling Water||L/min||30||30||30|